Samsung Clone S10 Lite Flash File MT6580 8.0 | Firmware | Rom
Samsung Clone S10 Lite Flash File MT6580 8.0 Firmware Rom
If you are looking for a flash file or firmware for your Samsung Clone S10 Lite device, then you have come to the right place. In this article, we will provide you with the download link and instructions on how to flash your Samsung Clone S10 Lite device using the SP Flash Tool.
The Samsung Clone S10 Lite is a clone or replica of the original Samsung Galaxy S10 Lite smartphone. It has a 6.7-inch display, a quad-camera setup, and a 4500 mAh battery. However, it runs on a MediaTek MT6580 chipset, which is a low-end processor that does not support 4G LTE networks. The Samsung Clone S10 Lite also has a different firmware or software than the original Samsung Galaxy S10 Lite, which may cause some issues or errors on your device.
Samsung Clone S10 Lite Flash File MT6580 8.0 | Firmware | Rom
Therefore, if you want to fix any software-related problems on your Samsung Clone S10 Lite device, such as bootloop, hang on logo, network error, virus infection, or dead boot, you need to flash your device with the correct flash file or firmware. Flashing your device will erase all your data and settings, so make sure you backup your important files before proceeding.
Download Samsung Clone S10 Lite Flash File MT6580 8.0 Firmware Rom
The flash file or firmware for the Samsung Clone S10 Lite device is available for free download from the link below. The flash file is in a zip format, which contains the scatter file, the firmware file, the USB driver, and the SP Flash Tool.
Download Link: [Samsung Clone S10 Lite Flash File MT6580 8.0]
File Size: 1 GB
File Name: Samsung_Clone_S10_Lite_MT6580_8.0.zip
How to Flash Samsung Clone S10 Lite Device Using SP Flash Tool
The SP Flash Tool is a software application that allows you to flash or install firmware on MediaTek devices. You can use the SP Flash Tool to flash your Samsung Clone S10 Lite device by following the steps below:
Extract the downloaded zip file on your computer.
Install the USB driver for your device on your computer. If you already have it installed, skip this step.
Run the SP Flash Tool as administrator.
Click on the "Choose" button under the "Scatter-loading File" section and locate the scatter file from the extracted folder. The scatter file has a .txt extension and is named "MT6580_Android_scatter.txt".
Click on the "Download" button at the top of the SP Flash Tool.
Turn off your Samsung Clone S10 Lite device and remove the battery if possible.
Connect your device to your computer using a USB cable while holding the volume down or volume up button.
The SP Flash Tool will detect your device and start flashing it automatically.
Wait for the flashing process to complete. You will see a green checkmark when it is done.
Disconnect your device from your computer and reboot it.
Congratulations! You have successfully flashed your Samsung Clone S10 Lite device using the SP Flash Tool. You can now enjoy using your device without any software issues.
Disclaimer
This article is for educational purposes only. We are not responsible for any damage or data loss that may occur on your device as a result of following this guide. Flashing your device is a risky process that may void your warranty or brick your device if done incorrectly. Please proceed at your own risk.